How do you make donuts in SolidWorks?

Publish date: 2022-11-01
SolidWorks Lesson 1.2: Your First Part (Donut)
  • Start with a new part (File, New, Ctrl+N)
  • Click the 'Extrude Boss/Base' button.
  • Now we will need to select a plane – TOP.
  • The window will rotate to the top view, centered on the origin.
  • Click on the 'circle' tool on the sketch toolbar.
  • Click on the origin, then click again outside of the origin.

    • Beside this, how do you create a revolve in Solidworks?

    Creating Revolve Features

  • Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves.
  • Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
  • In the PropertyManager, set the options.
  • Click .

    • Furthermore, what is the base feature? The first feature you create while building a part is called the base feature; you construct the remainder of the part by adding more features that either modify or add detail to the base feature.

    Beside this, how do you create an axis of revolution in Solidworks?

  • Create a new 2D sketch.
  • Create all solid sketch geometry on one side of the axis.
  • Choose Revolve Boss/Base from the features menu.
  • Pick the axis you wish to use for the revolve.
  • Specify direction and angle.
  • Accept the Feature.

    • What is a revolve feature?

    About the Revolve Feature. Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material. You can create the following revolve types: • Revolved protrusion—Solid, Thickened.

    What is revolve in Solidworks?

    Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

    How do you use the revolve base in Solidworks?

    Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.

    How do you make a sphere in Solidworks?

    Creating a Solid Sphere
  • Create a new sketch.
  • Draw a circle with a line intersecting it directly through the centre point.
  • Trim one side of the circle away, leaving the central sketch line as solid.
  • Create a Revolve Boss/Base.
  • Direction Angle should be set to 360°
  • Accept the feature.

    • How do you do a revolved boss in Solidworks?

    Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.

    What is sweep in Solidworks?

    Under the SOLIDWORKS Cut Sweep command, there is an option which allows you to select a solid body instead of a sketch as a profile to produce the cut. The following image shows two bodies and a helix which works as the path for the sweep command.

    How do you rotate a part in Solidworks?

    Use the “Rotate Component” command found under the Assembly tab of the CommandManager (under the Move Component flyout) Right-click on the component in the graphics area and choose “Move with Triad”. Select the rings to rotate.

    How do I use the sweep tool in SolidWorks?

    To create a sweep:
  • Sketch a closed, non-intersecting profile on a plane or a face. If you use guide curves:
  • Create the path for the profile to follow. Use a sketch, existing model edges, or curves.
  • Click one of the following:
  • In the PropertyManager:
  • Set the other PropertyManager options.
  • Click OK .

    • How do you rotate a 3d sketch in Solidworks?

    Revolve a 3D Sketch?
  • Sweep a circle with a straight line as the main guide curve.
  • Use the 3D sketch as a guide curve.
  • Constrain the circle section center to the straight line guide curve, and constrain the perimeter of the circle to the guide curve using a point.

    • ncG1vNJzZmiemaOxorrYmqWsr5Wne6S7zGifqK9dmbxuxc6uZKaZm5p6pbvNrqusZZmjerS7y6KbsKeioMA%3D