How do you replace rear shocks on a truck?
Publish date: 2023-05-27
step 1: Removing the Shock (0:58)Similarly, how do I change the shocks on my rear truck?
step 1: Removing the Shock (0:58)
Additionally, how much does it cost to replace rear shocks? The average cost for a shock absorber replacement - rear is between $227 and $363. Labor costs are estimated between $149 and $189 while parts are priced between $78 and $174.
Simply so, how long do rear shocks last on a truck?
In general, a shock absorber should last at least 50,000 miles before you need to have it replaced. However, the real determining factor is where you drive and how you drive. For instance, if you do a lot of off-road driving, or spend a lot of time on dirt roads, your shocks will wear out much more quickly.
How much does it cost to replace shocks on a truck?
Shock absorbers or struts can cost $25-$350 or more each, depending on the make and model of vehicle and the quality of the part. Although it could cost as much as $1,400 for a set of four, most do-it-yourselfers spend an average of $150-$250 to replace four shocks/struts.
Do you need an alignment after replacing rear struts?
Re: Do I need an alignment after rear strut replacement? As long as you remove ONLY the strut hardware and you don't pull bolts out for the LCA, UCA, or the knuckle, the alignment should not change unless ride height changes significantly.How long does it take to replace rear shocks?
How long does it take to replace rear shocks? It will take about 30 minutes if you're learning as you go. If you know what you're doing, it will probably take about 20 minutes.How do I know if my truck shocks are bad?
Other signs of car shocks and struts in bad condition are unusual noises over bumps, excessive body lean or sway in turns, or that the front end of the vehicle dives sharply in hard braking. Bad shocks also can affect steering control and cause uneven tire wear.Can you replace rear shocks without a jack?
You do not need to jack up the truck to remove or replace the REAR shocks. The front shock would require the truck to be jacked up to remove the tires.When should you replace shocks on a truck?
Like all automotive parts, your vehicle's shocks and struts follow a specific maintenance schedule. Experts say that shocks and struts should be replaced every 50,000 to 100,000 miles. However, that's just a general recommendation.How do I know if my car needs new shocks?
What Are the Signs that My Vehicle Needs New Shocks or Struts?How do you remove a rear shock?
Removing the shock: Use an allen key to loosen the lower bolt which secures the shock to the frame, but do not take it out yet. Supporting the rear wheel, undo the lower bolt fully, and slide it out. It may require some persuasion with a tap from a hammer, but do not be too vigorous.How do you check rear shocks?
On the road, if you find that your car bounces around a lot, has a hard time holding a turn or is affected by crosswinds, you may need new shocks. The “bounce test” requires some effort. Go to one corner of the car and push down. When you let go, the car should bounce up, then settle back to at-rest height.How long do 4x4 shocks last?
Shocks are usually FUBAR after 70 - 80k km. Because the deterioration takes place gradually, we do not tend to notice that they are past their sell by date. Bounce testing a 4x4 bakkie with an upgraded suspension is laughable.Should I replace all 4 shocks at the same time?
Yes, you need to replace both shocks at the same time. One new shock can (and will) have an adverse effect on the handling and thus safety. A new shock has different damping characteristics as the old one and it can lead to weird steering behaviour, loss of grip on one wheel, etc.Do Bilstein shocks wear out?
The life expectancy target for all Bilstein shocks is 100K miles of hard road use. At 120K, you should consider replacing the shocks if you notice a difference in ride or handling. In general, you can expect to get at least 80-90K out of a set of Bilstein OE C4 shocks.What does a bad strut sound like?
Knocking noises when driving over bumps The struts are solid units that allow the chassis, wheel assembly and body to move cohesively when a bump is hit while driving. If you notice a knocking or clunking sound coming from an area near the front or rear tires, it's most likely due to worn out or broken struts.Should I replace front and rear shocks at the same time?
It's not necessary, but it's usually recommended to replace them in pairs, for example, both front struts or both rear shocks. This is because a new shock absorber will absorb road bumps better than the old one. The answer is no: if the spring is in a good shape, it can be re-used with the new strut.How can I make my truck ride smoother?
How Can I Make My Truck Ride Smoother?How do I know if my shock absorbers are worn?
Is Your Car “Cursed?” 6 Noticeable Symptoms of Worn ShocksDo you need alignment after replacing rear shocks?
A rear shock change does not require an alignment, but as others said, a front strut change would require one.Do I need alignment after replacing shocks?
Yes, especially strut suspension. I'm usually a cheap and will wait do to an alignment after shocks AND tires, but generally any time a suspension piece is removed, replaced, or upgraded, it is best to go ahead and align it.ncG1vNJzZmiemaOxorrYmqWsr5Wne6S7zGifqK9dmbxuxc6uZKudoKGupLGMq5yaql2otbCvyqxkqKZdlnq1vtScog%3D%3D